Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black
8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector.
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance.
1.8" LCD screen: The output voltage is displayed on the 1.8" LCD screen, which is easy to read (1.8" LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself.
Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know.
When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V).
Computer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester, 1.8'' LCD Screen (Aluminum Alloy Enclosure)
[8-in-1 ATX Power Supply Tester] -- Support test 20-pin IDE / 24-pin IDE / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors
[Aluminum Alloy Enclosure] -- Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance
[1.8'' LCD Screen] -- Outputted Voltages shows on the 1.8'' LCD Screen, Easy to Read ( The 1.8'' LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It？Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It's Not Beautiful, You Can Tear It Off by Yourself
[Beep Alarm] -- When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know
NOTE: The voltage of IDE / SATA / P6 / P8 interface is displayed by the three lights on the left of the power tester. If their voltage is normal, the three groups of lights (+ 12V, + 3.3, + 5V) will be on. If the light is not on, it indicates that the interface line group is faulty
Deep Blue ATX PSU Switch 20-Pin Power Supply Jumper Tester Female 4 Lot
Lot of 4 switches to use ATX PSU power without connection to motherboard. Connector is 20-Pin which fits both 20-Pin and 24-Pin PSU connectors. See image 2. A 2" x 2" panel is sent with each switch ordered. Panel has a cut to allow switch to be installed without removing pins.
Mailed USPS First Class Parcel from USA, usually same day then arrives in 2-3 business days.
A 2" x 2" panel is sent with each switch ordered. Panel has a cut to allow switch to be installed without removing pins. Lot of 4 switches to use ATX PSU power without connection to motherboard. On/Off switch on 19 inch cable that can be conveniently located to control PSU and view its status on the lighted switch.